Lack of hot water due to a replacement water heater is not fun. Your water heater gets daily use, much like the majority of your appliances, and with time, you’ll require a replacement. You should anticipate replacing your hot water heater about once every ten years because its lifespan is typically 8 to 12 years. You can safeguard your investment by performing routine maintenance, so keep that in mind. Your water heater can endure as long as possible with the assistance of professional maintenance checks and maintenance.
Nobody enjoys a chilly shower or dirty dishes, so ideally you’ll want to replace your water heater before it fully breaks out. If you wait too long, you can end up with far worse issues, such as a leak, which could cause costly water damage.
There are a few things you can look out for to make sure there aren’t any problems in between sessions for professional maintenance. When it’s time to install a water heater, look out for these indicators:
Around the Water Heater: Rust and Corrosion
Watch out for any corrosion or rust that might have accumulated over time in the water heater tank and check it occasionally. The area around the temperature and pressure relief valves as well as the inlet and outlet connections are the two places you need to make sure to properly investigate. Rust and corrosion accumulation are especially likely to occur in these places. When you have your next scheduled maintenance appointment, ask your technician to show you where these locations are if you are unsure where they are. You can extend the life of your unit and put off buying a new hot water heater by keeping these areas clean and well-maintained.
Rust-colored water originating from your hot water heater should also be on the lookout. The inside of your tank is likely rusting if this is the case. You should think about replacing your water heater right away because this kind of damage will eventually result in a leak of water.
You might need to replace your hot water heater if you have lukewarm or cold water.
When you turn up the faucets in your shower and notice that the water is cold or lukewarm, it’s a clear sign that your water heater needs to be replaced. When your water doesn’t truly get warm or hot at all, it typically indicates there is an issue rather than just a delay in feeling warm water start to come out. Often, this is a clear sign that you should think about installing a water heater.
Surrounding the Water Heater, There Is A Pool
You must stroll around your unit and look for any standing water while checking it for rust and corrosion. A leak or crack most certainly exists inside your hot water tank if you detect even a small amount of dampness. Water is forced out through the lesions as the metal in your tank swells and cracks as a result of heat. The water heater may need to be replaced as a result of this, which may also be causing the tank to leak.
What is the cost of replacing a water heater?
If your water heater is showing signs of needing to be replaced, you may be interested in learning how much a new one will cost. Angie’s List reports that “a 50-gallon tank costs between $795 and $2,800 for the unit and installation, depending on several variables.” Water heater replacement costs can be affected by a number of things. The kind of unit you have now and what kind you replace it with will rely on those factors. If building codes have changed after the installation of your old unit, there may potentially be additional fees. The cost of replacing your water heater is also influenced by labor rates in your area.
Inquire About Water Heater Installation with BJC Plumbers North Bergen!
Including professional water heater replacement, all the services you require are available in one location. Trust the experts at BJC Plumbers North Bergen if your water heater is showing indicators that it needs to be replaced. Give us a call or visit https://plumbernorthbergen.com/ to speak with the plumbing specialists in North Bergen.
